I. Product Introduction
Retarding polycarboxylic acid water reducing agent has the characteristics of super plasticization, high slump retention, high reinforcement, and low shrinkage, and can be formulated with different strength grades of concrete. It is especially suitable for the preparation of high-strength, high-fluidity, self-compacting, high-durability, and high-performance concrete. Non-toxic and harmless, safe for health and environment.
Technical Specifications
|
Item |
standard |
Factory technical indicators |
|
|
Performance |
Colorless or light yellow liquid |
Colorless or light yellow liquid |
|
|
Fluidity of cement paste mm(1h),≥ |
250 |
280 |
|
|
Water reduction rate(%)≥ |
-- |
-- |
|
|
Bleeding rate ratio(%)≤ |
60 |
42 |
|
|
Air content(%),≤ |
6.0 |
1.8 |
|
|
Difference in setting time |
Initial setting |
-90~+120 |
+20 |
|
Final setting |
-90~+120 |
+30 |
|
|
Compressive strength ratio(%)≥ |
1Day |
170 |
180 |
|
3Day |
160 |
175 |
|
|
7Day |
150 |
155 |
|
|
28Day |
140 |
150 |
|
|
Shrinkage ratio(%)≤ |
|
110 |
90 |
|
Corrosion of steel bars |
No corrosion |
- |
|
Product scope of use
1. Retarding polycarboxylic acid water reducing agent is suitable for preparing various grades of pumped concrete and commercial concrete for long-distance transportation, especially suitable for construction pipe piles. And suitable for high-strength concrete, fluid concrete, self-compacting concrete, large-volume concrete, high-performance concrete, clear water concrete and other structures.
IV. Applicable methods and matters needing attention
1. Retarding polycarboxylic acid water reducing agent is a colorless or light yellow transparent liquid.
2. Before use, the optimum dosage should be determined according to the engineering construction requirements, material characteristics, and trial mix.
3. When adding this product, it should be accurately measured to avoid large dosage errors. Leakage and repeated mixing are strictly prohibited.
4. Retarding polycarboxylic acid water reducing agent cannot be used in combination with naphthalene-based water-reducing agent. When it is used in combination with other kinds of admixtures, it should be confirmed by experiment.
5. Changes in the mud content of sand and gravel materials and the quality of admixtures have a greater impact on the effect of product water reduction. Users should choose aggregates and admixtures with composite standards.
6. In order to ensure the safety of use, it is recommended that the user determine the best blending amount of this product through trial mixing before the first use or before changing the cement type in the project.
V. Packaging, Transportation and Storage
This Retarding polycarboxylic acid water reducing agent is liquid, packed in plastic barrels, 1 ton per barrel, and can also be transported by tanker. The storage process should prevent leakage, exposure and high temperature. Storage with ironware should be avoided. The storage period is one year. After expiration, it should be tested to determine the use. This product is non-flammable and explosive and should be kept properly.

