Home > News > Content
Nonionic Polyacrylamide Acidic Or Neutral
Oct 18, 2017

The effect of polyacrylamide is different depending on the state of the raw water being treated. Nonionic Polyacrylamide The type, size, concentration and pH of the suspended matter in the raw water will vary depending on the water quality. It should be noted that these conditions are usually constantly changing. The conditions of the agitation will affect the state of the floc formation. Therefore, Nonionic Polyacrylamide in order to obtain the best results, we need to adjust the stirring conditions and PH value. The high molecular weight flocculant flocculation polymer to be used will vary depending on the flocculation, pressurized flotation, Nonionic Polyacrylamide sludge dewatering and other treatment purposes.

First, the anionic polyacrylamide APAM for high concentrations of positively charged inorganic suspended solids, and suspended particles are relatively coarse (0.01-1mm), pH is neutral or alkaline solution.

Second, cationic polyacrylamide CPAM for negative charge, containing organic matter suspended solids.

Third, non-ionic polyacrylamide NPAM for organic, Nonionic Polyacrylamide inorganic mixed state of suspended solids separation, the solution was acidic or neutral.

Four, zwitterionic polyacrylamide CAPAM for suspended solids properties and PH value of the variable sewage treatment.

In the use of polyacrylamide when the need to pay attention to the following points: 1, dissolved state; 2, water temperature; 3, suspended solids in water; 4, the PH value of water; 5, the degree of mixing of pharmaceutical and water quality solution.

Polyacrylamide is formulated as an aqueous solution at a concentration of 0.1% to 0.5% to 10%, depending on the water quality to be treated. Nonionic Polyacrylamide But also according to the choice of polyacrylamide molecular weight level determines the level of dissolved concentration. Powdered polyacrylamide Concentration 0.2% - 0.6% -12% Powdery polyacrylamide dissolves faster than granular polyacrylamide, Nonionic Polyacrylamide but powdered polyacrylamide is slightly larger than granular Powdered polyacrylamide reduces the molecular weight during the production process.