Home > News > Content
Anionic Polyacrylamide The Process Is Simple
Aug 14, 2017

Anionic polyacrylamide is the largest and most widely used in the same product range and can not be used as a water treatment material. It is also an important multifunctional additive, Anionic Polyacrylamide such as its good thickening properties, Many industries are added as thickeners. At the same time to participate in the product manufacturers are more, the main reason is that the product production process is simple, the processing accuracy is not high. But the product has a lower added value. If there is no large number of applications as a basis, Anionic Polyacrylamide it can have a big development. If only the production of this product is also difficult in the complex and volatile polymer flocculant market based.

Anionic polyacrylamide has two forms, Anionic Polyacrylamide one is white solid particles, the other is the emulsion form. Solid products can be divided into fine powder and particles, product molecular weight from 8 million to 25 million range, can be adjusted by adjusting the production of raw materials to adjust the formula. Can also be prepared to withstand high temperature acid and alkali products, Anionic Polyacrylamide the use of water must be dissolved, but can not be dissolved in most organic solvents. Dry powder products after the preparation of a transparent viscous liquid, emulsion products are similar to the same milk diluted.

Anionic polyacrylamide can be formulated in any proportion, Anionic Polyacrylamide should be careful when adding to avoid the occurrence of agglomeration, the product through the mechanical, physical, chemical role, from the role of in the Sexual and acid conditions are thickening effect, in the neutral and acid conditions are thickening effect.

Anionic polyacrylamide as a flocculant, Anionic Polyacrylamide mainly used in industrial solid-liquid separation process, including sedimentation, clarification, enrichment and sludge dewatering and other processes, the application of the main industries are: ham factory wastewater waste, Anionic Polyacrylamide urban sewage treatment, paper industry , Food processing industry, petrochemical industry, metallurgical industry, mineral processing industry, dyeing industry and sugar industry and a variety of industrial wastewater treatment. Anionic Polyacrylamide Used in the municipal sewage and meat, poultry, food processing waste water treatment in the process of sludge sedimentation and sludge dewatering, through its positive charge groups on the sludge in the negative charge of organic colloid neutralization and High polymer excellent bridging function, to promote colloidal particles gathered into large pieces of floc, Anionic Polyacrylamide separated from its suspension. The effect is obvious, less dosage.

Anionic polyacrylamide in the paper industry can be used as paper dry strength agent, Anionic Polyacrylamide retention aid, filter aid, can greatly improve the quality of paper, save costs and improve the production capacity of paper mills. Can be directly with the inorganic salt ions, Anionic Polyacrylamide fibers and other organic polymer electrostatic bridge in order to enhance the physical strength of the paper to reduce the loss of fiber or filler, to speed up the filter, from the enhanced, retention, help filter, Anionic Polyacrylamide can also be used White water treatment, at the same time, in the deinking process can play a significant flocculation effect.